5 Gallon, Polyplex Polymer

• Studies show dramatic increased flexural, impact and bond strengths
• Nearly 50% increase in flexural strength
• Over 125% increase in impact strength
• Over 250% increase in bond strength
• Decrease concretes permeability helping stain resistance 
• Decrease shrinkage and curling of concrete
• Improves dispersion of color pigments
• Improves polishing characteristics
• Improves/eliminates curling and shrinkage issues
• Increased workability to the mix.  Acts as a Superplasticizer lowering your water/cement ratio
• Helps with better adherence to vertical mold surfaces, eliminating sliding of the wet mix
• UV stable and will not break down and lose effectiveness on extended exposure
• Freeze/Thaw stable up to 5 times eliminating delays and/or overnight delivery charges in winter months
• Recommended dosage: 3-5% polymer solids to cementicious material
  

Other uses than just GFRC

• Replacement for water in your slurry mix to minimize shrinkage and cracking
• Use in standard wet cast concrete to minimize curling, increase strength and other benefits
• Use as a bonding agent for patching or bonding-pad repairs
• Overlays

  Specification 

• 47% solids
• Acrylic based
• pH: 8-10
• Minimum film forming temp.: Aprox 50 degrees F
• Specific gravity: 1.05
• Avg. polymer particle size 150-200mm
• Viscosity: 300 CPS
• Meets all requirements for PCI Manual GFRC Appendix L- Specification for Polymer Curing Admixture